CONTROL MODULE
DEEPSEA PANEL
Yingpai Power provides original UK Deepsea control panel,which is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications.
Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).
KEY FEATURES | KEY BENEFITS |
Heated display option. | Ensures the display continues to operate in extreme cold weather conditions. |
3-phase generator sensing. | Provides true generator sensing. |
Power monitoring (kW h, kVAr, kV Ah, kV Ar h). | Provides clear accurate power measurement information. |
Remote communications (RS232 & RS485) | Provides secure and simple off site monitoring. All ports are continuously active. |
Configurable inputs/outputs (9/8). | Provides multiple installation options. |
CAN and magnetic pick-up sensing. | Makes the module ideal for standard and electronic engine applications. |
Fuel usage monitor and low level alarms. | Tracks the amount of fuel being used and sounds an alarm if over/under fuel use is detected. |
Tier 4 CAN engine support. | Ensures the control module can be used with the latest in modern electronic engine technology. |
Configurable display languages. | Ensures the control module is suitable for worldwide use. |
Power save mode. | Reduces the power usage within system batteries. |
Integral PLC editor. | Ensures additional applications are easily integrated into the system. |
DSE Configuration Suite PC Software. | Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring. |
Load switching, load shedding & dummy load outputs. | Allows load options and dummy load requirements to be independently controlled. |
COMAP PANEL
Yingpai Power provides original Czech ComAP control panel,which is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications.
Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).
KEY FEATURES |
• Single gen-set controller for Prime-power applications |
• Direct communication with EFI engines |
• Total remote monitoring and control |
• Easy to install, configure and use |
• Wide range of communication capabilities including: |
• connection via RS232, RS485, CAN and on board USB |
• internet access using Ethernet, GPRS or 4G |
• support for Modbus and SNMP protocols |
• Internal PLC support with PLC editor and monitor included in Lite Edit |
• Cloud-based monitoring and control via Web Supervisor |
• Active SMS and emails in different languages |
•SNMP traps |
• Geofencing and tracking via Web Supervisor |
• 2× 10 A binary outputs for cranking and fuel solenoid |
• Option for up to 16 additional binary inputs/outputs |
• Flexible event based history with up to 350 events |
• Load shedding, dummy load capability |
• Tier IV final support |
• Automatic temperature based cooling/heating |
• Comprehensive gen-set protections |
• Multipurpose flexible timers |
• True RMS measurement |
• Available also in low temperature (LT) version SMARTGEN PANEL
|
Yingpai Power provides original Chinese Smartgen control panel,which is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications.
Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).
KEY FEATURES |
•Display with backlight, optional language interface (Chinese, English, Spanish and Russian) |
•Acrylic screen, improved wearable and scratch resistance property; |
•Silica-gel panel and keys can well adapt to higher and lower temperature; |
•With RS485 communication port, can achieve “three remote” functions via MODBUS protocol; |
•Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power system; |
•Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens; |
•Mains have functions of over/under voltage and lack of phase; over/under voltage, over/under frequency and over current |
•Precision measure and display of parameters about engine; |
•Control protection: Automatic start/stop of gen-set, load transfer(ATS control) and perfect failure display and protection; |
•With ETS, idle speed control, pre-heat control, speed droop/raising control, all of them are relay output; |
•Parameter setting: Allow user to modify setting and store them in internal FLASH memory. |
•Multi sensors of temperature, pressure and fuel level can be used directly, parameters can be defined by user; |
•Multi conditions of crank disconnect (speed sensor, oil pressure, generator) can be selected; |
•Power supply range: (8~35)VDC, accommodating to different starting battery volts; |
•All parameters use digital modulation, instead of analog modulation using conventional potentiometer |
•Add rubber gasket between shell and controller screen, the waterproof can reach IP55; |
•Controller is fixed by metal fixing clips; |
•Modular design, flame-retardant ABS shell, embedded mounting, compact structure and easy installation. Besides CONTROL MODULE we also supply Cummins Gas Engine Generator Set,Cummins Marine Diesel Generator Set 50Hz,Cummins Marine Diesel Generator Set 60Hz,Land Use CUMMINS Power Diesel generator sets 50Hz,Land Use CUMMINS Power Diesel generator sets 60Hz,PARALLEL CABINET,ATS CABINET。 |